Addressable RGB Fan
The SquA RGB addressable RGB fan series is equipped with a square-shaped frame powered by ENERMAX LED LIGHTING Technology, which provides incredibly bright and even lighting. The addressable RGB LEDs can create colourful rainbow effects and allow sycronization with supported motherboard software. SquA RGB is designed for silent operation without compromising performance and therefore has a starting speed of 300 rpm and up to 40% more airflow than other RGB fans. To optimize the airstream SquA RGB generates concentrated vortex with the Vortex Frame Design and facilitates air inlet effectively with the ENERMAX’s Air Inlet Design.
SquA RGB fans support addressable RGB technology for a unique RGB lighting experience. The square-shaped frame equipped with the ENERMAX LED Lighting Technology offers bright and even illumination without visible LED spots.
SquA RGB is equipped with light vents on the backside of the frame creating a diamond like effect where other RGB fans just show black.
The fan blades of SquA RGB are optimized for silent operation and the speed can be turned down to 300 RPM.
SquA RGB’s frame is equipped with rubber damping pads to prevent vibration transfer to the chassis and to ensure low noise operation.
Synchronizable RGB lighting via addressable RGB header of motherboards from Asus, Asrock, MSI and Gigabyte. Programmable lighting effects via motherboards software.
Note: Addressable RGB LEDs run on 5V, do not connect them to a non-addressable 4 pin header with 12V.
A eifficient integration of the RGB Frame results in an increased blade surface, which gives SquA RGB 40% more airflow compared to other RGB fans.
To optimize the airstream SquA RGB generates concentrated vortex with the Vortex Frame Design and facilitates air inlet effectively with the ENERMAX’s Air Inlet Design.
The integrated RGB control box offers quick setup of 10 pre-set lighting effects without the need of a RGB motherboard or additional software.
* 3 Fan Pack only
For stand-alone operation SquA RGB Single Pack fan displays rainbow RGB lighting effects by connecting the PWM power cable.
* Single Pack only
|Number of Blades||9|
||120 x 120 x 26mm
||300 – 1,500RPM|
|Fan Control Steps
||WS2812B addressable RGB|
|RGB Sync. Compatibility
||Asus, Asrock, MSI and Gigabyte|
||Racing-Rainbow (Default), Breathing-Rainbow, Flash-Rainbow, Overlaying-Rainbow, Flow-Rainbow, Colors auto-run (8 colors), Ripple auto-run (8 colors), Overlaying-RED, Overlaying-GREEN, Overlaying-BLUE||Racing-Rainbow|
|Rated Voltage Fan
|Rated Current Fan
|Rated Voltage Fan
||5V||5V (or 12V when connecting to the PWM header only)|
|Rated Current LED
||0.68 A||0.68 A (or 0.28A when connecting to the PWM header only)|
|Total Current LED
||2.04 A||0.68 A|
|Max. Current Controller
|RGB Sync. Connector
||4-pin aRGB connector (5V/D/-/G)|
||Molex/SATA power connector||–|
||12 – 23dB(A)
||41.67 – 115,99m3/h
||24.53 – 68,27CFM|
||0.17 – 1.898mm-H2O|
|Included in the delivery||
3 x SquA RGB fan, 12 x screws, RGB control box, magnetic adhesive, molex power cable, SATA power cable, aRGB 3 to 1 cable (5V/D/-/G) , GIGABYTE aRGB adapter, PWM 3 to 1 cable
|1 x SquA RGB fan, 4 x screws, molex to 4-pin PWM adapter, aRGB Y cable (5V/D/-/G) , GIGABYTE aRGB adapter|
|Product Dimensions||120 x 120 x 26mm||120 x 120 x 26mm|
|Product Box Dimensions||160 x 133 x 100mm||160 x 133 x 32mm|
|Product Box Gross Weight||0.74kg||0.25kg|
|Master Carton Dimensions||538 x 335 x 309mm||490 x 340 x 270mm|
|Master Carton Gross Weight||14.8kg||15.2kg|
|Master Carton Pieces||20||60|