Craft an exceptional modern system with the ENERMAXK8 PC case. Boasting a high-quality 0.7mm SPCC case body and tempered glass panels, the ENERMAXK8 combines durability with transparent visual design.

Experience outstanding expandability that supports up to an ATX motherboard, a 360mm AIO or a maximum of 7 fans. Equipped with USB 3.2 Gen1 Type A and Gen2 Type C, the ENERMAXK8 is tailored for mainstream needs. The fan bracket design and enlarged cable management space not only simplify system building but also contribute to the aesthetics of your refreshing system.

Embark on the journey of building your modern system now.

Datasheet EN – ENERMAXK8
Manual – ENERMAXK8

 

Technical Specification

ECA-EK8-BB-ARGB ECA-EK8-WW-ARGB
General
Color
Midnight Black Snow White Black
Material SPCC 0,7mm, Tempered Glass
Dimensions D467 x W220 x H491mm
Cooling Fan Support
Front Fan Slots
3x 120mm PWM ARGB (2x pre-installed) / 3x 140mm (optional)
Top Fan Slots
(optional) 3x 120mm / 2x 140mm 
Rear Fan Slot
1x 120mm PWM ARGB (pre-installed) 
PSU Tunnel Fan Slots
Radiator Radiator Support
Front Radiator
240/280/360mm 
Top Radiator 240mm
Rear Radiator 120mm 
Installation Slots
Drive Bays
3.5″
2
2.5″
 2 (2 x converted from 3.5”HDD Cage)
Expansion Slots
7 x re-usable
I/O Panel
USB3.2 Gen1 Typ A, USB3.2 Gen2 Type C, 1x HD Audio
Maximum Compatibility
Graphics Card Length
350mm (with Radiator installed) / 390mm w/o Radiator
CPU Cooler Height
up to 170mm
PSU Size
Stand ATX Type
Motherboards
Mini ITX, Micro ATX, ATX
Cable Routing Space
23mm

 

Dealer Information
ECA-EK8-BB-ARGB ECA-EK8-WW-ARGB
Product Dimensions D467 x W220 x H491mm D467 x W220 x H491mm
Product Weight 9.01kg 9.01kg
Product Box Dimensions D538 x W292 x H542 mm D538 x W292 x H542 mm
Product Box Gross Weight 10.25kg 10.25kg
EAN-Code 4713157728104 4713157728111

ATX M/B OK!

Support up to ATX motherboard installation.


FRIENDLY INSTALLATION WITH THUMB SCREWS INCLUDED

You can change the screw into the included thumb screws to simplify the installation process without using a screwdriver.


SUPPORTS UP TO 2 DRIVE BAYS

Built-in two drive bays for flexible installation of HDD and SSD.

 

Feasible permutations as listed below
.3.5” HDD x 2
.3.5” HDD+2.5” SSD
.2.5” SSD x 2

SUPPORTS UP TO 360 AIO OR 7 FANS WITH FAN BRACKET


ENERMAXK8 is competent in installing 360mm AIO at the front panel. You can simply pull out the built-in fan bracket and set the radiator on the inside of it while fans are on the outside to install a 360mm AIO with ease.


Pre-installed 3 ARGB PWM fans. Supporting up to 7 fans in the system build including 3 x 120mm fan installation at the front panel for better ventilation.


7 REUSABLE PCIE SLOTS FOR BUILDING HIGH-END SYSTEM WITH FLEXIBILITY

Switch the PCIe slots you need at any time to keep up with the latest graphic cards.


WIDER SPACE WIDER SELECTION

Support up to 390mm-width graphic card installation.


SOLID QUALITY WITH
CONCISE CONFIGURATION

ENERMAXK8 is made with an SPCC 0.7mm high-quality case body to enhance the protection of the system. The extra enlarged cable management space and full-space cable holes accelerate the building of your streamlined PC system.


ARGB & PWM CONTROL HUB

Effortlessly control the lighting effect with motherboard ARGB softwares & built-in 6-port control hub.


FILTERS IN THE CASE,
KEEPS THE DUST AWAY

A mesh filter located at the top and a pull-out dust collector at the bottom can effectively minimize dust accumulation and facilitate effortless cleaning.


IN LINE WITH THE MODERN APPLICATION

I/O panel built-in USB 3.2 Gen1 Type A and Gen2 Type C consistent with the latest Common EU Charger from the European Parliament.

① Power Button
② Headphone
③ Microphone
④ USB 3.2 Gen1 Type A
⑤ USB 3.2 Gen2 Type C
⑥ Reset Button (RGB Sync Button)